Asus AAEON UP Xtreme UP-WHL01 - Deck Control

CEC Client Installation 40
CEC Client Installation Supplemental Appendix for UP Xtreme
5.1.7 Deck Control
Command Feature: This feature allows a Playback Device (a deck or disc player or
recorder) to be controlled by another device (e.g. TV).
The following messages are used for the Deck Control feature: <Deck Status>, <Give
Deck Status>, <Deck Control>, <Play>.
OpCode
Value
Description
Parameters
Response
Supported
<Deck
Control>
0x42
Used to
control a
device’s media
functions.
[Deck
Control
Mode]
Perform the specified
actions, or return a
<Feature Abort>
message. It is device
dependent whether or
not a Skip Forward/Wind
or Skip Backward
/Rewind command is
legal when in the ‘Deck
Inactive’ state. If the
device is in standby and
receives an eject
command, it should
power on and eject its
media.
Yes
<Give
Deck
Status>
0x1A
Used to
request the
status of a
device,
regardless of
whether or not
it is the current
active source.
[Status
Request]
<Deck Status>
Yes
<Deck
Status>
0x1B
Used to
provide a
deck’s status to
the initiator of
the <Give
Deck Status>
msg
[Deck Info]
Yes
Table Continues on Next Page