Asus AAEON UP Xtreme UP-WHL01 - Page 97

CEC Client Installation 42
CEC Client Installation Supplemental Appendix for UP Xtreme
OpCode
Value
Description
Parameters
Response
Supported
<Select
Analogue
Service>
0x92
Directly selects
an Analogue TV
service
[Analogue
Broadcast
Type]
[Analogue
Frequency]
[Broadcast
System]
Change to the
selected analogue
service and
stream its output
on the HDMI
connection. If the
tuner device is not
capable of
selecting this
service, respond
with a <Feature
Abort>
Yes
<Select
Digital
Service>
0x93
Directly selects a
Digital TV, Radio
or Data
Broadcast
Service
[Digital
Service
Identification]
Change to the
selected digital
service and
stream its output
on the HDMI
connection. If the
tuner device is not
capable of
selecting this
service, respond
with a <Feature
Abort>
Yes
<Tuner Step
Decrement>
0x06
Used to tune to
next lowest
service in a
tuner’s service
list. Can be used
for PIP.
None
Follower tunes to
next lowest service
in its service list.
Yes
<Tuner Step
Increment>
0x05
Used to tune to
the next highest
service in a
tuner’s service
list. Can be used
for PIP.
None
Follower tunes to
next highest
service in its
service list.
Yes
<Tuner
Device
Status>
0x07
Use by a tuner
device to
provide its status
to the initiator of
the <Give Tuner
Device Status>
message.
[Tuner
Device Info]
Yes