Asus B150M-C D3 - Page 45

ASUS B150M-C D3
2-7
 Thebootdeviceoptionsvarydependingonthedevicesyouinstalledtothesystem.
 TheBoot Menu(F8)buttonisavailableonlywhenthebootdeviceisinstalledtothe
system.
Saves the changes
and resets the
system
Selects the display language
of the BIOS setup program
Displays the CPU/motherboard temperature,
CPU voltage output, CPU/chassis fan speed,
and SATA information
Displays the system properties of the
selected mode. Click <Enter> to switch
EZ System Tuning modes
Displays the
Advanced mode
menus
Selects the boot
device priority
Loads optimized default
settings
Shows the
bootable
devices
Displays the CPU Fan’s speed. Click
the button to manually tune the fans
Searches
FAQ
EZ Mode
Bydefault,theEZModescreenappearswhenyouentertheBIOSsetupprogram.TheEZ
Modeprovidesyouanoverviewofthebasicsysteminformation,andallowsyoutoselect
thedisplaylanguage,systemperformancemodeandbootdevicepriority.Toaccessthe
AdvancedMode,clickExit/AdvancedMode,thenselectAdvancedMode.
ThedefaultscreenforenteringtheBIOSsetupprogramcanbechanged.Refertothe
Setup Modeiteminsection2.8 Boot menufordetails.