7. Intel
®
B85 Serial ATA 3.0 Gb/s connectors (7-pin SATA3G 1~2 [dark brown])
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives via Serial ATA 3.0
Gb/s signal cables.
8. Intel
®
B85 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~4 [yellow])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI].