Asus B85M-VIEW PAKER - USB Configuration

2-24
Chapter 2: Getting started
BIOS Hotkey Pressed [Disabled]
This item become congurable only when the previous item is set to [Enabled] and allows
you to enable or disable this function. Conguration options: [Enabled] [Disabled]
Un-Configure ME [Disabled]
Sets this item to [Disabled] to uncongure AMT/ME without using a password or set it to
[Enabled] to use a password. Conguration options: [Enabled] [Disabled]
2.6.6 USB Configuration
The items in this menu allow you to change the USB‑related features.
The USB Devices item shows the auto‑detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled] Enables the support for USB devices on legacy operating systems (OS).
[Disabled] The USB devices can be used only for the BIOS setup program.
[Auto] Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Intel
®
xHCI Mode [Smart Auto]
[Auto] Keeps the last operation of xHCI controller in OS during bootup.
[Smart Auto] Enables the operation of xHCI controller.
[Enabled] Enables the function.
[Disabled] Disables the function.
EHCI Hand-off [Disabled]
[Enabled] Enables the support for operating systems without an EHCI hand‑off
feature.
[Disabled] Disables the function.
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to section 1.2.3 Motherboard layout for the location of the USB ports.
2.6.7 Platform Misc Configuration
The items in this menu allow you to congure the Platform Misc.
PCI Express Native Power Management [Disabled]
Allows you to enable or disable PCIE express native power management. Conguration
options: [Enabled] [Disabled]