Need help?Do you have a question about the Asus BRT-AC828 and is the answer not in the manual?
General| DSL WAN | - |
|---|---|
| Ethernet WAN | Yes |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| WLAN data transfer rate (max) | 1734 Mbit/s |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| Output current | 2.37 A |
| Output voltage | 19 V |
| AC input voltage | 100 - 240 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| USB version | 3.2 Gen 1 (3.1 Gen 1) |
| Ethernet LAN (RJ-45) ports | 10 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 2 |
| Security algorithms | 64-bit WEP, 128-bit WEP, WPA-PSK, WPA2-PSK, WPS |
| Product type | Tabletop router |
| Product color | Black |
| LED indicators | LAN, Power, WLAN |
| Antennas quantity | 4 |
| Antenna gain level (max) | 3 dBi |
| Cables included | LAN (RJ-45) |
| Minimum RAM | 512 MB |
| Minimum storage drive space | 256 MB |
Weight and Dimensions| Depth | 300 mm |
|---|---|
| Width | 200 mm |
| Height | 49.5 mm |
| Weight | 950 g |
Guides on optimal router placement for wireless coverage and signal integrity.
Instructions for preparing the modem before connecting the router.
Steps to connect the modem and computer to the router.
Step-by-step guide on how to install the router antennas.
Guide on how to use the QIS feature for automatic internet setup.
Explains how the router detects ISP connection types (DHCP, PPPoE, etc.).
Instructions for configuring the router for Automatic IP (DHCP) connection.
Instructions for configuring PPPoE, PPTP, and L2TP connections.
Steps to assign wireless network names (SSID) and security keys.
Steps to manually connect wireless clients to the network.
Steps to connect wireless clients using the WPS button.
Introduction to the ASUSWRT web graphical user interface.
To Next Page