1-4
Chapter 1: Product Introduction
4. Button:
• Press this button to decrease the value of the function selected or move
to the next function.
• This is also a hotkey for Volume adjustment.
5. MENU Button:
• Press this button to enter the OSD menu.
• Press this button to enter/select the icon (function) highlighted while the
OSD is activated.
• Press this button over five seconds to enable or disable the key lock
function.
6. Button:
• Press this button to increase the value of the function selected or move to
the previous functions.
• This is also a hotkey for Brightness adjustment.
7. Input Select Button:
• Use this hotkey to switch from VGA, DVI(VN247NA), HDMI1(VN247HA),
or HDMI2(VN247HA) input signal.
8. Power Button/Power Indicator:
• Press this button to turn the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
White ON
Amber Standby mode
OFF OFF
To Next Page
Loading...
