Asus F2A85-M PRO - Setting up Your Display

ASUS F2A85-M PRO
6-9
Chapter 6
6.3.2 Setting up your display
LucidLogix Virtu MVP solution comes with two distinct modes that allows you to enjoy better
graphics either from your built-in video output (i-Mode) or from a discrete graphics card (d-
Mode).
i-Mode
To use LucidLogix Virtu MVP in i-Mode, the display must be connected to the onboard video
output.
Ensure to set the Primary Display to iGPU in BIOS to activate i-Mode support.
d-Mode
To use LucidLogix Virtu MVP in d-Mode, the display must be connected to the installed
graphics card.
• Ensure to set the Primary Display to PCIE or PCIE/PCI in BIOS to enable d-Mode
support.
• d-Mode is recommended for an enhanced 3D gaming performance.

different models.
d-Mode (VGA output from

i-Mode (VGA output

www.devicemanuals.eu