Asus FX505DY Series User Manual

Disassembly Procedure
V1.0
2 - 1
Rev.
Change History
Change Time
Originator
V1.0
First Release
2019/1/17
Susan_Tsai
V2.0
Add MB ABSORBER/FX505DY RX560 GPU ABSORBER
2019/1/18
Susan_Tsai
V2.1
P11: Add SSD ABSORBER/SSD AL FOIL.
P15: Add MB TOP CU FOIL.
P22: Add MB TOP ABSORBER/MB TOP SSD ABSORBER.
P23: Add MB Thermal KAPTON/MB GPU KAPTON.
P26: Add KB TOP CU WASHER.
2019/1/17
Stephanie
V2.2
P12: Add FX505DY WLAN INDICATOR
2019/4/16
Stephanie
Disassembly Procedure
Please follow the information provided in this section to perform the complete disassembly procedure of the
Notebook. Be sure to use proper tools described before.
SUS FX505DY series notebook consists of various modules. This chapter describes the procedure for the
complete notebook disassembly and assembly (Assemble document please look up from the last page).
In addition, in between procedures, the detailed disassembly procedure of individual modules will be
provided for your service needs.
The disassembly procedure consists of the following steps:
 Service overview
 Appropriate Tools
 Bottom case Module
 Battery Module
 HDD
 SSD
 WLAN Module
 Memory Module
 Thermal and Fan Module
 Main Board
 LED Board
 Topcase Module
 LCD Module
 Gap Step
A

Asus FX505DY Series Specifications

General

Processor	AMD Ryzen 5 3550H / Ryzen 7 3750H
Graphics	AMD Radeon RX 560X
Operating System	Windows 10 Home
Weight	2.2 kg (4.85 lbs)
Bluetooth	Bluetooth 4.2
Display	15.6-inch, Full HD (1920 x 1080), IPS-level
RAM	8GB DDR4
Storage	256GB SSD
Battery	3-cell, 48Wh
Wireless	802.11ac
Ports	1 x HDMI, 1 x RJ45

Summary

Bottom Case Module

Battery Module

Disconnect Battery Connector from PCB

Step to disconnect the battery connector from the PCB.

HDD Module

Remove HDD Screws

Steps for removing screws securing the HDD.

SSD Module

Remove SSD Screw

Instructions for removing the single screw securing the SSD.

WLAN Module

Memory Module

Remove Memory Module and Mylar

Steps to tear off mylar and remove the memory modules.

Thermal and Fan Module

Remove Thermal Module Screws

Instructions for removing the 13 screws securing the thermal module.

Main Board

Disconnect Cables from Main Board

Steps to disconnect various cables (eDP, FFC, Touchpad, Speaker, DC IN) from the MB.

Remove Main Board Screws

Instructions for removing the 5 screws securing the main board.

LED Board

Top Case Module

LCD Module

Remove Bezel Mylar

Steps to remove mylar from the corners of the LCD bezel.

Separate Bezel and LCD

Procedure to separate the LCD bezel from the LCD panel using a plastic blade.

Remove LCD Panel Screws and EDP Cable

Steps to remove 6 screws and disconnect the EDP cable from the LCD panel.

Remove LCD Panel Adhesives

Steps to carefully remove the 2 LCD panel adhesives from the LCD cover.

Disconnect EDP Cable on LCD Panel

Final step to disconnect the EDP cable from the LCD panel.