Asus H110I-PLUS D3 - Monitor Menu

2.7 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Scroll down to display the other BIOS items.
2.7.1 CPU/ MotherBoard Temperature [xxxºC/xxxºF]/
[Ignore]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select [Ignore] if you do not wish to display the detected temperatures.
2.7.2 CPU Fan/ Chassis Fan Speed [xxxx RPM]/ [Ignore]/
[N/A]
The onboard hardware monitor automatically detects and displays the CPU and chassis fan
speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the eld
shows N/A. Select [Ignore] if you do not wish to display the detected speed.
2.7.3 CPU Core Voltage, 3.3V Voltage, 5V Voltage, 12V
Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select [Ignore] if you do not want to detect this item.
2.7.4 Q-Fan Conguration
The subitems in this menu allows you to congure the Q‑Fan features.
Qfan Tuning
Click this item to automatically detect the lowest speed and congure the minimum duty cycle
for each fan.
CPU Q-Fan Control [PWM Mode]
[Disabled] Disables the CPU Q‑Fan control feature.
[PWM Mode] Enable the CPU Q‑Fan control in PWM mode for 4‑pin CPU fan.
ASUS H110I-PLUS D3 2-29