Asus H110M-A - Page 34

Booting the system in DOS environment
To boot the system in DOS:
1. InserttheUSBashdrivewiththelatestBIOSleandBIOSUpdatertotheUSBport.
2. Bootyourcomputerthenpress<F8>tolaunchtheselectbootdevicescreen.
3. Whentheselectbootdevicescreenappears,inserttheSupportDVDintotheoptical
drivethenselecttheopticaldriveasthebootdevice.
Please select boot device:
 and  to move selection
ENTER to select boot device
ESC to boot using defaults
P2: ST3808110AS (76319MB)
aigo miniking (250MB)
UEFI: (FAT) ASUS DRW-2014L1T(4458MB)
P1: ASUS DRW-2014L1T(4458MB)
UEFI: (FAT) aigo miniking (250MB)
Enter Setup
4. Whenthebootingmessageappears,press<Enter>withinve(5)secondstoenter
FreeDOSprompt.
Welcome to FreeDOS (http://www.freedos.org)!
C:/> d:
D:/>
5. OntheFreeDOSprompt,typed:thenpress<Enter>toswitchthediskfromDriveC
(opticaldrive)toDriveD(USBashdrive).
ISOLINUX 3.20 2006-08-26 Copyright (C) 1994-2005 H. Peter Anvin
A Bootable DVD/CD is detected. Press ENTER to boot from the DVD/CD.
If no key is pressed within 5 seconds, the system will boot next priority
device automatically. boot:
Updating the BIOS file
To update the BIOS file:
1. OntheFreeDOSprompt,typebupdater /pc /gandpress<Enter>.
D:/> bupdater /pc /g
2-4 Chapter 2: Getting started