EasyManua.ls Logo

Asus H170I-PLUS D3 - Internal Connectors

Asus H170I-PLUS D3
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ASUS H170I-PLUS D3
1-15
10. HDMI port.ThisportisforaHigh-DenitionMultimediaInterface(HDMI)connector,
andisHDCPcompliantallowingplaybackofHDDVD,Blu-ray,andotherprotected
content.
11. DisplayPort. This port connects a display monitor or a home-theater system.
12. DVI-D port. ThisportisforanyDVI-Dcompatibledevice.DVI-Dcan’tbeconvertedto
outputRGBSignaltoCRTandisn’tcompatiblewithDVI-I.
Multi-VGAoutputsupportsuptothreedisplaysunderWindows
®
OSenvironment,two
displaysunderBIOS,andonedisplayunderDOS.
1.7.2 Internal connectors
1. Intel
®
H170 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_3~6, SATAEXPRESS)
TheseconnectorsconnecttoSerialATA6.0Gb/sharddiskdrivesviaSerialATA6.0
Gb/ssignalcables.
IfyouinstalledSerialATAharddiskdrives,youcancreateaRAID0,1,5,and10
congurationwiththeIntel
®
RapidStorageTechnologythroughtheonboardIntel
®
H170chipset.
• Theseconnectorsaresetto[AHCI]bydefault.IfyouintendtocreateaSerialATA
RAIDsetusingtheseconnectors,settheSATAModeitemintheBIOSto[RAID].
Refertosection2.6.3 PCH Storage Configuration for details.
• BeforecreatingaRAIDset,refertothemanualbundledinthemotherboardsupport
DVD.
• TheSATAEXPRESSconnectorcansupportoneSATAExpressdeviceortwoSATA
devices.
A
B
A B
SATA6G_6
SATA6G_4
SATA6G_3
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
SATA6G_5
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
H170I-PLUS D3
H170I-PLUS D3 Intel
®
SATA 6.0Gb/s connectors
SATAEXPRESS
GND
RSATA_TXP3
RSATA_TXN3
GND
RSATA_RXN3
RSATA_RXP3
GND
GND
RSATA_TXP4
RSATA_TXN4
GND
RSATA_RXN4
RSATA_RXP4
GND
Floating
Device_Reset
GND
Detection

Related product manuals