Asus H170I-PLUS D3 - Serial Port Configuration

Wi-Fi Controller [Enabled]
This item allows you to enable or disable the Wi‑Fi controller. Conguration options:
[Disabled] [Enabled]
Bluetooth Controller [Enabled]
This item allows you to enable or disable the Bluetooth controller. Conguration options:
[Disabled] [Enabled]
Intel LAN Controller [Enabled]
This item allows you to enable or disable the Intel LAN controller. Conguration options:
[Disabled] [Enabled]
The following item appears only when you set the Intel LAN Controller item to [Enabled].
Intel LAN PXE Option ROM [Off]
Allows you to enable or disable the PXE OptionRom of the Intel LAN controller.
Conguration options: [On] [Off]
Charging USB devices in Power State S5 [Disabled]
[Enabled] Charges USB devices even when the system is in Power State S5. State
S5 is the soft‑off mode or shutdown state where your computer has no
memory state and is not doing any computing tasks.
[Disabled] Disables this function.
Serial Port Configuration
The sub‑items in this menu allow you to set the serial port conguration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).Conguration options: [Enabled]
[Disabled]
Change Settings [IO=3F8h; IRQ=4]
This item appears only when you set the Serial Port to [Enabled] and allows you
to select the Serial Port base address. Conguration options: [IO=3F8h; IRQ=4]
[IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
2.6.8 APM
ErP Ready [Enabled]
Allows BIOS to switch off some power at S5 to get the system ready for ErP requirement.
When set to [Enabled], all other PME options will be switched off.
Conguration options: [Enabled] [Disabled]
Restore AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system state was
before the AC power loss.
ASUS H170I-PLUS D3 2‑33