Need help?Do you have a question about the Asus H81M-A and is the answer not in the manual?
General| Non-ECC | Yes |
|---|---|
| Memory channels | Dual-channel |
| Memory slots type | DIMM |
| Number of memory slots | 2 |
| Supported memory types | DDR3-SDRAM |
| Maximum internal memory | 16 GB |
| Supported memory clock speeds | 1066, 1333, 1600 MHz |
| Processor socket | LGA 1150 (Socket H3) |
| Processor manufacturer | Intel |
| Compatible processor series | Intel Celeron, Intel Pentium |
| Number of SATA connectors | 4 |
| Number of EATX power connectors | 1 |
| USB 3.2 Gen 1 (3.1 Gen 1) connectors | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Audio chip | Realtek ALC887 |
| Component for | PC |
| Power source type | ATX |
| Motherboard chipset | Intel® H81 |
| Audio output channels | 7.1 channels |
| Motherboard form factor | micro ATX |
| Windows operating systems supported | Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64 |
| Supported storage drive interfaces | SATA II, SATA III |
| Maximum resolution | 4096 x 2160 pixels |
| Maximum graphics card memory | 1024 MB |
| Parallel processing technology support | Not supported |
| Cables included | SATA |
| LAN controller | Realtek RTL8111G |
| Ethernet interface type | Gigabit Ethernet |
| BIOS type | UEFI AMI |
| ACPI version | 2.0a |
| BIOS memory size | 64 Mbit |
Weight and Dimensions| Depth | 175 mm |
|---|---|
| Width | 226 mm |
Covers electrical shock hazards and safe handling procedures for the motherboard and components.
Explains the structure of the user guide and the topics covered in each chapter.
Details symbols used in the manual and text formatting conventions for clarity.
Outlines essential precautions to take before installing components or changing settings.
Describes the physical layout, installation guidelines, screw holes, and component placement for the motherboard.
Step-by-step instructions for safely installing the CPU and its heatsink/fan assembly into the LGA1150 socket.
Details supported memory types, capacities, and best practices for installing and removing DIMMs.
Guides users through the process of installing, configuring, and understanding IRQ assignments for expansion cards.
Instructions for clearing the CMOS and RTC RAM using the 3-pin CLRTC jumper.
Configures system wake-up from S1/S3/S4 sleep modes using keyboard and USB devices.
Sets up the system wake-up function for USB devices from different sleep states.
Describes the external ports on the motherboard, including USB, audio, LAN, and video outputs.
Explains the internal headers and connectors for fans, power, USB, audio, and system panel.
Details the standby power LED's indication of system power states (ON, sleep, soft-off).
Lists supported operating systems and recommends best practices for installation.
Explains how to use the included Support DVD to install drivers, software, and utilities.
Covers updating the motherboard's BIOS using ASUS utilities like EZ Update and EZ Flash 2.
Details how to enter and navigate the BIOS setup utility for system configuration.
Displays system information and allows basic configuration of date, time, language, and security.
Enables configuration of overclocking-related settings for performance tuning.
Provides detailed settings for CPU, PCH, SATA, System Agent, USB, and other system devices.
Displays system status like temperature, voltages, fan speeds, and allows fan control.
Allows configuration of system boot options, including boot device priority and fast boot settings.
Offers access to special functions like BIOS update utilities and O.C. profiles.
Provides options to save or discard changes, load defaults, and exit the BIOS setup.
To Next Page
