Asus H81M-P PLUS - 1.7 Connectors (continued); 10. Chassis Intrusion Connector (4-1 pin CHASSIS); 11. TPM Connector (14-1 pin TPM)

ASUS H81M-P PLUS
1-19
10. Chassis intrusion connector (4-1 pin CHASSIS)
Thisconnectorisforachassis-mountedintrusiondetectionsensororswitch.Connect
one end of the chassis intrusion sensor or switch cable to this connector. The chassis
intrusionsensororswitchsendsahigh-levelsignaltothisconnectorwhenachassis
componentisremovedorreplaced.Thesignalisthengeneratedasachassisintrusion
event.
Bydefault,thepinlabeled“ChassisSignal”and“Ground”areshortedwithajumper
cap.Removethejumpercapsonlywhenyouintendtousethechassisintrusion
detection feature.
H81M-P PLUS
H81M-P PLUS Chassis intrusion connector
PIN 1
+5VSB_MB Chassis Signal GND
CHASSIS
11. TPM connector (14-1 pin TPM)
ThisconnectorsupportsaTrustedPlatformModule(TPM)system,whichcansecurely
storekeys,digitalcerticates,passwords,anddata.ATPMsystemalsohelpsenhance
networksecurity,protectsdigitalidentities,andensuresplatformintegrity.
TheTPMmoduleispurchasedseparately.
H81M-P PLUS
H81M-P PLUS TPM connector
PIN 1
TPM
+3VSB
S_PCIRST#_TBD
GND
C_PCICLK_TPM
+3V +3V
F_CLKRUN F_SERIRQ F_FRAME# F_LAD3 F_LAD2 F_LAD1 F_LAD0