Asus M2N DH - Page 53

ASUS M2N / M2N DH 2-31
Q-Connector (System panel)
ASUS Q-Connector allows you to easily to connect the chassis front panel cables
to the motherboard. Perform these steps to install ASUS Q-Connector.
Step 1
Connect the front panel cables to their
respective connectors on the ASUS
Q-Connector. Refer to the labels on the
Q-Connector for proper connection and
pin denition.
Step 2
Carefully connect the ASUS
Q-Connector to the System panel
connector.
The ASUS Q-Connector ts only in one
orientation; if it doesn’t t, try reversing
it.
When installed, the Q-connector appears
as shown.