3-5
5. If you select
Share-WEP
,
WPA-
PSK, or WPA2-PSK
in Step
4, you are required to input a
password. You can choose to
congure the password in either
ASCII or HEX mode. If you
choose HEX mode, input 10 hex
digits for 64-bit encrytion, or 26
hex digits for 128-bit encryption.
Click
Next
to continue.
6. Select your Internet connection
and click
Next
.
7. The AP mode conguration is
complete. Record the setup
information on your note and
click
Finish
to quit the ASUS
WiFi-AP Solo wizard.
To Next Page
Loading...
