Memory Conguration
Select the DRAM
Frequency programing
method. If Auto,
the DRAM speed will
be based on SPDs.
If Limit, the DRAM
spe will not exceed
the specic value.
If Manual, the DRAM
specied will be
programmed regardless.
Memory Conguration
Memory Setting: 266MHz-4.0-4-4-11-2T
Memclock Mode [Auto]
CAS Latency (CL) [Auto]
TRCD [Auto]
TRP [Auto]
TRAS [Auto]
Command Timing (2T mode) [Auto]
MCT Timing Mode [Auto]
Bank Interleaving [Auto]
Enable Clock to All DIMMS [Disabled]
MemClk Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Enabled]
Memclock Mode [Auto]
Sets the memory clock mode.
The following item appears when the Memclock Mode is set to Limit or Manual.
Sets the memory clock mode limit.
CAS Latency (CL) [Auto]
Sets the CAS Latency (CL) mode.
TRCD [Auto]
Sets the TRCD mode.
TRP [Auto]
Sets the TRP mode.
TRAS [Auto]
Sets the TRAS mode.
To Next Page
Loading...
