Command Timing (2T mode) [Auto]
Sets the Command Timing (2T mode).
MCT Timing Mode [Auto]
Sets the MCT Timing Mode.
Bank Interleaving [Auto]
Allows you to enable the bank memory interleaving.
Enable Clock to All DIMMs [Disabled
Enables or disables clock to all DIMMs.
MemClk Tristate C3/ALTVID [Disabled]
Enables or disables the MemClk Tristate C3/ALTVID.
Memory Hole Remapping [Enabled]
Enables or disables the memory remapping around memory hole.
To Next Page
Loading...
