Asus M2N-VM - Motherboard - Micro ATX - USB Configuration

ASUS M2N-VM DVI 2-33
IRQ-xx assigned to [PCI Device]

When set to [Reserved], the IRQ is reserved for legacy ISA devices.

USB 1.1 Controller [Enabled]
Enables or disables the USB 1.1 Controller.

USB 2.0 Controller [Enabled]
Enables or disables the USB 2.0 Controller.

Legacy USB Support [Enabled]
Allows you to enable or disable support for USB devices on legacy operating
systems (OS). Setting to Auto allows the system to detect the presence of USB
devices at startup. If detected, the USB controller legacy mode is enabled. If no
USB device is detected, the legacy USB support is disabled.

The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows None.
2.4.6 USB Conguration
The items in this menu allows you to change the USB-related features. Select an

USB Conguration
Module Version - 2.24.1-13.4
USB Devices Enabled:
1 Drive
USB 1.1 Controller [Enabled]
USB 2.0 Controller [Enabled]
Legacy USB Support [Auto]
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-Off [Enabled]
USB Mass Storage Device Conguration
Options
Enable
Disable
E3608_M2N-VM-DVI.indb 22 12/27/07 4:40:05 PM