2-20 Chapter 2: BIOS setup
PCI-Express Frequency (MHz) [100]
Allows you to select PCI-Express frequency. Conguration options: [100]
[101] [102] [103]... [150]
Overclock Options [Auto]
Allows you to select the overclock options.
Conguration options: [Auto] [Overclock 3%] [Overclock 5%] [Overclock 7%]
The following item appears only when the AI Overclocking item is set to
[Overclock Prole].
Selecting a very high CPU frequency may cause the system to become
unstable! If this happens, revert to the default setting.
Chipset Voltage [Auto]
Allows selection of the chipset voltage. The conguration options vary depending
on the CPU installed. Conguration options: [Auto] [1.2V] [1.3V]
Memory Voltage [Auto]
Allows you to select the memory voltage or set it to auto for safe mode.
Conguration options: [Auto] [1.900V] [1.950V]
CPU Frequency (MHz) [200.0]
Displays the frequency sent by the clock generator to the system bus and
PCI bus. The value of this item is auto-detected by the BIOS. Use the <+>
and <-> keys to adjust the CPU frequency. You can also type the desired
CPU frequency using the numeric keypad. The values range from 200 to 300.
To Next Page
Loading...
