Asus M2N-X - Jumpers Configuration; USB Device Wake-Up Jumper Settings

1-20 Chapter 1: Product introduction
2. USB device wake-up (3-pin PS2_USBPWR1-4, USBPWR56,
USBPWR7-10)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least
500 mA on the +5VSB lead, and a corresponding setting in the BIOS.
M2N-X
M2N-X USB Device Wake Up
3
2
2
1
PS2_USBPWR1-4
(Default)
+5V
+5VSB
3
2
2
1
USBPWR56 USBPWR7-10
(Default)
+5V
+5VSB
3
2
2
1
(Default)
+5V
+5VSB