Asus M2N-X - Advanced BIOS Menu; Advanced Memory Settings

2-24
Chapter 2: BIOS setup
MCT Timing Mode [Auto]
Conguration options: [Auto] [Manual]
Bank Interleaving [Disabled]
Enable or disable the Bank Memory Interleaving.
Conguration options: [Disabled] [Auto]
Enable Clock to All DIMMs [Disabled]
Enable or disable the Unused Clocks to DIMMs Even Memory Slots are
not populated.
Conguration options: [Disabled] [Enabled]
MemCLK Tristate C3/ATLVID [Disabled]
Enable or disable the MemCLK Tri-Stating during C3 and Alt VID.
Conguration options: [Disabled] [Enabled]
DQS Signal Training Control [Enabled]
Enable or disable the DQS Signal Training Control.
Conguration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Enable or disable the Memory Remapping Around Memory Hole.
Conguration options: [Disabled] [Enabled]