6-4 Chapter 6: NVIDIA
®
SLI™ technology support
7. Connect a VGA cable or a DVI-I cable to the graphics card installed on
the blue PCI Express slot.
5. Align and insert the SLI exible cable connector to the goldngers on
each graphics card. Make sure that the connector is rmly in place.
6. If using a 20-pin ATX power connector, connect a 4-pin ATX power
cable to the EZ Plug™ labeled EZ_PLUG on your motherboard.
The onboard red warning LED lights up if you do not plug a 4-pin ATX
power cable to the EZ Plug.
SLI exible cable connector
ASUS EZ Plug™
To Next Page
Loading...
