AS US M2N8-VMX 1-29
8. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module
that supports either High Denition Audio or AC`97 audio standard.
Connect one end of the front panel audio I/O module cable to this
connector.
• We recommend that you connect a high-denition front panel audio
module to this connector to avail of the motherboard high-denition
audio capability.
• If you want to connect a high-denition front panel audio module to
this connector, make sure that the Azalia Audio item in the BIOS is
set to [Enabled].