Asus M4A79XTD - Motherboard - ATX - Using a USB Floppy Disk Drive

4-18 Chapter 4: Software support
Chapter 4
To install the RAID driver in Windows
®
Vista
1. Insert the oppy disk with RAID driver into the oppy disk drive.
2. During the OS installation, select SB 750.
3. Follow the succeeding screen instructions to complete the installation.
4.5.4 Using a USB oppy disk drive
Due to OS limitation, Windows
®
XP may not recognize the USB oppy disk drive when you
install the RAID driver from a oppy disk during the OS installation.
To solve this issue, add the USB oppy disk drive’s Vendor ID (VID) and Product ID (PID) to
the oppy disk containing the RAID driver. Refer to the steps below:
1. Using another computer, plug the USB oppy disk drive, and insert the oppy disk
containing the RAID driver.
2. Right-click
My Computer on the
Windows
®
desktop or start menu,
and then select Manage from the
pop-up window.
3. Select
Device Manager. From the
Universal Serial Bus controllers,
right-click xxxxxx USB Floppy, and
then select Properties from the pop-up
window.
The name of the USB oppy disk
drive varies with different vendors.
4. Click Details tab. The Vendor ID (VID)
and Product ID (PID) are displayed.
or