Asus M4A79XTD - Motherboard - ATX - Page 71

ASUS M4A79XTD EVO 3-15
Chapter 3
TRFC0/TRFC01 [Auto]
Conguration options: [Auto] [90ns] [110ns] [160ns] [300ns] [350ns]
TREF [Auto]
Conguration options: [Auto] [Every 7.8ms] [Every 3.9ms]
DCT0:CKE drive strength [Auto]
DCT1:CKE drive strength [Auto]
Conguration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT0:CS/ODT drive strength [Auto]
DCT1:CS/ODT drive strength [Auto]
Conguration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT0:ADDR/CMD drive strength [Auto]
DCT1:ADDR/CMD drive strength [Auto]
Conguration options: [Auto] [1x] [1.25x] [1.5x] [2x]
DCT0:MEMCLK drive strength [Auto]
DCT1:MEMCLK drive strength [Auto]
Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT0:Data drive strength [Auto]
DCT1:Data drive strength [Auto]
Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT0:DQS drive strength [Auto]
DCT1:DQS drive strength [Auto]
Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DCT0:Processor ODT [Auto]
DCT1:Processor on-die terminat [Auto]
Conguration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%] [60 ohms +/-
20%]
NB Voltage [Auto]
Allows you to set the Northbridge voltage. The values range from 1.10V to 1.40V with a
0.02V interval. Use the <+> and <-> keys to adjust the value.
NB 1.8V Voltage [Auto]
Allows you to set the Northbridge 1.8V voltage. The values range from 1.80V to 2.00V with a
0.1V interval. Use the <+> and <-> keys to adjust the value.
SB Voltage [Auto]
Allows you to set the Southbridge voltage. The values range from 1.20V to 1.35V with a
0.15V interval. Use the <+> and <-> keys to adjust the value.
• Setting the voltages to a high level may damage the CPU, memory module, and
chipset permanently. Proceed with caution.
• The system may require a better cooling system to work stably under high voltage
settings.