Asus M4A88T-V EVO/USB3 - Page 43

10. IEEE 1394a connector (10-1 pin IE1394_1)
This connector is for an IEEE 1394a port. Connect the IEEE 1394a module cable
to this connector, then install the module to a slot opening at the back of the system
chassis.
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage the
motherboard!
The IEEE 1394a module is purchased separately.
M4A88T-V EVO/USB3
PIN 1
TPA1- GND TPB1- +12V GND
TPA1+
GND
TPB1+
+12V
IE1394_1
M4A88T-V EVO/USB3 IEEE 1394a connector
ASUS M4A88T-V EVO Series 1-31