Asus M4A89GTD PRO Series - Page 53

ASUS M4A89GTD PRO Series 2-35
Chapter 2
7. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot opening
at the back of the system chassis.
The S/PDIF module is purchased separately.
8. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
 

 
the
Front Panel Type

front panel audio module to this connector, set the item to [AC 97]. By default, this
connector is set to [HD].