3-32 Chapter 3: BIOS setup
Chapter 3
CPU Q-Fan Mode [Standard]
[Turbo] Sets to [Turbo] to achieve maximum CPU fan speed.
[Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on
the CPU temperature.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set CPU Q-Fan Mode to [Manual].
CPU Upper Temperature [70ºC/158ºF]
Sets the upper limit of the CPU temperature.
[30ºC/86ºF] [40ºC/104ºF] [50ºC/122ºF] [60ºC/140ºF][40ºC/104ºF] [50ºC/122ºF] [60ºC/140ºF]
[70ºC/158ºF] [80ºC/176ºF] [90ºC/194ºF]
Sets the maximum CPU fan duty cycle. When the CPU temperature reaches the upper
limit, the CPU fan will operate at the maximum duty cycle.
CPU Lower Temperature [20ºC/68ºF]
Displays the lower limit of the CPU temperature.
Sets the minimum CPU fan duty cycle. When the CPU temperature is under 20ºC/68ºF,
the CPU fan will operate at the minimum duty cycle.
Chassis Q-Fan Mode [Disabled]
[Disabled] Disables the Chassis Q-Fan control feature.
[Enabled] Enables the Chassis Q-Fan control feature.
The following item appears only when you set Chassis Q-Fan Mode to [Enabled].
Chassis Fan Speed Low Limit [200 RPM]
A warning message will appear to remind you that the chassis fan speed is lower than the
selected value.
Chassis Q-Fan Mode [Silent]
[Turbo] Sets to [Turbo] to achieve maximum chassis fan speed.
[Standard] Sets to [Standard] to make the chassis fan automatically adjust depending
on the chassis temperature.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
To Next Page
Loading...
