Asus M4A89GTD PRO Series - Boot Menu; Boot Device Priority

ASUS M4A89GTD PRO Series 3-33
Chapter 3
3.8 Boot menu
The Boot menu items allow you to change the system boot options. Select an item then press
<Enter> to display the submenu.
3.8.1 Boot Device Priority
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
Species the Boot Device
Boot Priority sequence.
A virtual oppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the rst boot
device.
←→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Boot Settings
Boot Device Priority
Boot Settings Conguration
Security
Boot Device Priority
1st Boot Device [Removable Dev.]
2nd Boot Device [Hard Drive]
3rd Boot Device [ATAPI CD-ROM]
BIOS SETUP UTILITY
Boot
The following four items appear only when you set Chassi Q-Fan Mode to [Manual].
Upper Temperature [70ºC/158ºF]
Sets the upper limit of the system temperature.

[80ºC/176ºF] [90ºC/194ºF]

Sets the maximum chassis fan duty cycle. When the system temperature reaches the
upper limit, the chassis fan will operate at the maximum duty cycle.

Lower Temperature [20ºC/68ºF]
Displays the lower limit of the system temperature.

Sets the minimum chassis fan duty cycle. When the system temperature is under
20ºC/68ºF, the chassis fan will operate at the minimum duty cycle.

