Asus M4A89GTD PRO - Page 120

4-20 Chapter 4: Software support
Chapter 4
5. Browse the contents of the RAID driver
disk to locate the le txtsetup.oem.
6. Double-click the le. A window appears,
allowing you to select the program for
opening the oem le.
7. Use Notepad to open the le.
8. Find the
[HardwareIds.SCSI.Napa_i386_ahci8086] and
[HardwareIds.SCSI.Napa_amd64_ahci] sections in the txtsetup.oem le.
9. Type the following line to the bottom of the two sections:
id = “USB\VID_xxxx&PID_xxxx”, “usbstor”
10. Save and exit the le.
Add the same line to both sections.
The VID and PID vary with different vendors.
[HardwareIds.SCSI.Napa_i386_ahci8086]
id= “PCI\VEN_1002&DEV_4392&CC_0104”,”ahcix86”
id= “PCI\VEN_1002&DEV_4391&CC_0106”,”ahcix86”
id= “PCI\VEN_1002&DEV_4393&CC_0104”,”ahcix86”
id= “USB\VID_03EE&PID_6901”, “usbstor”
[HardwareIds.SCSI.Napa_amd64_ahci]
id= “PCI\VEN_1002&DEV_4392&CC_0104”,”ahcix64”
id= “PCI\VEN_1002&DEV_4391&CC_0106”,”ahcix64”
id= “PCI\VEN_1002&DEV_4393&CC_0104”,”ahcix64”
id= “USB\VID_03EE&PID_6901”, “usbstor”