ix
M4N75TD specications summary
(continued on the next page)
CPU AMD
®
Socket AM3; Phenom™ II / Athlon™ II /
Sempron™ 100 Series Processors
AMD
®
140W CPU Support
Supports 45nm CPU
Chipset NVIDIA nForce
®
750a SLI
®
Supports NVIDIA Clock Calibration (NVCC) function
System bus Up to 5200 MT/s HyperTransport™ 3.0
Memory 4 x DIMM, max. 16 GB, DDR3 2000(O.C.) / 1333 / 1066 MHz
ECC / non-ECC, un-buffered memory
Dual-channel memory architecture
* When you install a total memory of 4 GB capacity or more,
Windows
®
32-bit operating system may only recognize
less than 3 GB. We recommend using a maximum of 3 GB
system memory if you are using a Windows
®
32-bit OS.
** Refer to www.asus.com or this user manual for the
Memory QVL (Qualied Vendors Lists)
Multi-GPU support Supports NVIDIA
®
SLI™ Technology at x8 link
Supports Hybrid
SLI
®
Technology
Expansion slots 2 x PCIe 2.0 x16 slots (dual at x8 mode)
2 x PCIe x1 slots
2 x PCI 2.2 slots
Storage NVIDIA nForce
®
750a SLI
®
chipset
- 1 x Ultra DMA 133/100 port
- 6 x SATA 3.0 Gb/s ports (Legacy IDE operation is only
supported on drives 1–4)
NVIDIA
®
MediaShield™ RAID supports RAID 0, 1, 0+1,
5, and JBOD
LAN Broadcom
®
B5071 Gigabit LAN controller featuring AI NET 2
Audio VIA
®
VT1708S 8-channel High Denition Audio CODEC
- Supports Jack-Detection, Multi-Streaming,
and Front Panel Jack-Retasking
- Optical S/PDIF Out port at back I/O
- ASUS Noise Filter
IEEE 1394 VIA
®
VT6308P controller supports 2 x IEEE 1394a ports
USB 12 x USB 2.0 ports (6 ports at midboard; 6 ports at back
panel)