Asus M5A97 LE R2.0 - Page 67

ASUS M5A97 LE R2.0
3-13
Chapter 3
DCT1 Information:
CKE drive strength [Auto]
Conguration options: [Auto] [1x] [1.25x] [1.5x] [2x]
CS/ODT drive strength [Auto]
Conguration options: [Auto] [1x] [1.25x] [1.5x] [2x]
ADDR/CMD drive strength [Auto]
Conguration options: [Auto] [1x] [1.25x] [1.5x] [2x]
MEMCLK drive strength [Auto]
Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Data drive strength [Auto]
Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DQS drive strength [Auto]
Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Processor ODT [Auto]
Conguration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%] [60 ohms +/-
20%]
CPU Load-Line Calibration [Auto]
Load-line is dened by AMD VRM specications and affects CPU voltage. The CPU working
voltage decreases proportionally to CPU loading. This item allows you to enable or disable
the CPU Load-Line Calibration function. Conguration options: [Auto] [Disabled] [Enabled]
CPU/NB Load-Line Calibration [Auto]
CPU/NB Load-Line Calibration controls the behavior of the DRAM controller. This item allows
you to enable or disable the CPU/NB Load-Line Calibration function. Conguration options:
[Auto] [Disabled] [Enabled]
CPU & NB Voltage [Offset Mode]
Allows you to set the CPU & NB Voltage Mode. Different sub-items appear according to the
CPU & NB Voltage Mode item setting. Conguration options: [Offset Mode] [Manual Mode]
Offset Mode Sign [+]
This item appears only when you set the CPU & NB Voltage item to [Offset Mode] and allows
you to set the offset mode sign. Conguration options: [+] [-]
CPU Offset Voltage [Auto]
This item appears only when you set the CPU & NB Voltage item to [Offset Mode] and
allows you to set the CPU Offset voltage. The values vary with your CPU type with a
0.006250V interval.
CPU/NB Offset Mode Sign [+]
This item appears only when you set the CPU & NB Voltage item to [Offset Mode] and
allows you to set the offset mode sign. Conguration options: [+] [-]
CPU/NB Offset Voltage [Auto]
This item appears only when you set the CPU & NB Voltage item to [Offset Mode] and
allows you to set the CPU/NB Offset voltage. The values vary with your CPU type with
a 0.00625V interval.