Asus Maximus V Formula - Page 81

ASUS MAXIMUS V FORMULA Series
2-15
Chapter 2
7. Remove the bolt from the Wi-Fi antenna connector. Leave the washer on the
connector.
8. Insert the connector into the I/O shield’s Wi-Fi port hole.
Ensure that the washer is placed between the connector and the back of the I/O shield.
The Wi-Fi antenna and its cables are purchased separately.
9. Re-attach the bolt on the connector.
antenna connector
bolt
washer
I/O Shield
10. Connect the opposite end of the Wi-Fi antenna connector to the pins located on the
mPCIe Wi-Fi card.