Asus MK221H - Detaching the Arm;Base; (For VESA Wall Mount)

5ASUS MK221 Series LCD Monitor
2.3 Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of the MK221 Series LCD monitor is specially designed
for VESA wall mount.
To detach the arm/base:
1. Push up the cable cover to remove it from the arm (Figure 1).
2. Have the front of the monitor face down on a table.
3. Release the VESA cover.
4. Use a screwdriver to remove the four screws on the arm , then slide out the
arm/base to detach it from the monitor (Figure 2).
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Figure 1 Figure 2
Four screws