Asus MM19S - Front Panel Control; Adjusting The Picture

ASUS MM19S
6
• Connect the video cable from the monitor to the video card.
• Press the power button to turn on the monitor position. The power indicator will light up.
3.2 Front Panel Control
- Power Button:
When pressed, the monitor enters the off mode, and the LED turns blank. Press again to restore normal status.
- Left / Right Button:
The Left/Right Button is used to control the monitor functions. Press to switch functions or adjust settings.
- Auto Adjust Key:
The Auto Adjust Key is used to automatically set the H Position, V Position, Clock and Phase.
- Power Indicator:
Blue — Power On mode.
Amber
— Power Saving mode.
Dark
—Power Off Mode.
NO. Name Within OSD Without OSD
①
Splendid Button Exit OSD or back to previous menu
1.Activate Scenario selection menu.
2. Automatically adjust the image to its
optimized position, clock, and phase by
pressing the button for 2 seconds.
② - /
Button
Decrease the level of the function select
or move to the previous function.
Activate Volume adjustment menu
③
Power Button
Switch the LCD monitor on or off.
Blue:
normal operation mode
.
Amber: power saving mode.
Dark:
power off mode
Switch the LCD monitor on or off.
Blue:
normal operation mode
.
Amber: power saving mode.
Dark:
power off mode
④ +/ Button
Increase the level of the function select
or move to the next function.
Activate Brightness adjustment menu.
⑤
Menu Button Enter/select the icon highlighted. Activate the OSD main menu.
3.3 Adjusting The Picture
Adjustment steps:
1. Press the MENU-button to activate the OSD window.
2. Press < or > to select the desired function.
3. Press the MENU-button to select the function that you want to adjust.
http://www.wjel.net