5-30
Chapter 5: Software support
5.4.4 Creating a RAID 1 array (Security)
Creating a Security Array with New Drives
1. In the FastBuild™ utility main menu, press “1” to select Auto Setup.
5. Press N for the Create Only option. A message appears confirming that
your Security array has been created.
6. Press any key to reboot the system. During the boot process, the
MBFastTrak376 BIOS checks and displays the disk array information.
Array has been created.
<Press any key to reboot>
Do you want the disk image to be duplicated to another? (Yes/No)
Y - Create and Duplicate
N - Create Only
2. Use the arrow keys to go to the field Optimize Array for and select
“Security” with the space bar. The Mode field displays “Mirror”.
3. Press <Ctrl-Y> to save your selection.
4. The following message appears:
To Next Page
Loading...
