ASUS P5PL2 5-9
To launch the ASUS MyLogo™:
1. Launch the ASUS Update utility. Refer to section “4.1.5 ASUS Update
utility” for details.
2. Select Options from the drop down menu, then click Next.
3. Check the option Launch MyLogo to replace system boot logo before
flashing BIOS, then click Next.
4. Select Update BIOS from a file from the drop down menu, then click
Next.
5. When prompted, locate the new
BIOS file, then click Next. The
ASUS MyLogo window appears.
6. From the left window pane, select
the folder that contains the image
you intend to use as your boot
logo.
8. Adjust the boot image to your
desired size by selecting a value
on the Ratio box.
7. When the logo images appear on
the right window pane, select an
image to enlarge by clicking on it.
To Next Page
Loading...
