Asus MZ279HL Series - Page 21

3-6
ASUS LCD Monitor MZ279HL Series
• Aspect Control: Adjust the aspect ratio to Full, 4:3, or
OverScan.
• 4:3 is only available when input source is in 4:3 format.
• OverScan is only available for HDMI input.
• VividPixel: ASUS Exclusive Technol ogy that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjusting range is from 0~100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function.
• Adaptive-Sync: Allows an Adaptive-Sync supported graphics
source (HDMI) to dynamically adjust display
refresh rate based on typical content frame rates for power
efficient, virtually stutter free and low-latency display update.
• Position: Adjust the horizontal position (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100 (only available for VGA input).
• More: Return the next page of Image Setting.
• Back: Return the previous page of Image Setting.
• Focus Reduce the Horizontal-line noise and Vertical-line noise
of the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100 (only available for VGA input).
• Auto Adjust: Automatically perform Auto Adjust (only available
for VGA input).