Asus P10S-I - ASUS P10 S-I BIOS ACPI Settings

4-26
Chapter 4: BIOS Setup
ACPI Settings
Enable Hibernation [Enabled]
Allows you to enable or disable the ability of the system to hibernate (OS/S4 Sleep State).
Congurationoptions:[Disabled][Enabled]
This option may be not be effective with some OS.
ACPI Sleep State [S3 (Suspend to RAM)]
Allows you to select the highest ACPI sleep state the system will enter when the SUSPEND
button is pressed.
Congurationoptions:[SuspendDisabled][S3(SuspendtoRAM)]
APM
AllowsyoutoconguretheAdvancePowerManagement(APM)settings.
Restore AC Power Loss [Last State]
When set to
[Power Off]
,thesystemgoesintooffstateafteranACpowerloss.Whenset
to
[Power On]
,thesystemwillrebootafteranACpowerloss.Whensetto
[Last State]
,the
systemgoesintoeitherofforonstate,whateverthesystemstatewasbeforetheACpower
loss.
Congurationoptions:[PowerOff][PowerOn][LastState]
Power On By PCI [Disabled]
AllowsyoutoenableordisabletheWake-on-LANfeatureofIntelLAN.
Congurationoptions:[Disabled][Enabled]
Power On By PCIE [Disabled]
[Disabled] DisablesthePCIEdevicestogenerateawakeevent.
[Enabled] EnablesthePCIEdevicestogenerateawakeevent.