Asus P10S-M WS Series - Page 35

ASUS P10S-M WS Series
1-21
Chapter 1
6. Smart Ride Through (SmaRT) setting (3-pin SMART_PSU1)
This jumper allows you to enable or disable the Smart Ride Through (SmaRT) function.
This feature is disabled by default. Set to pins 1-2 to enable it. When enabled, SmaRT
allows uninterrupted operation of the system during an AC loss event.
7. SATADOM power setting (3-pin DOM1_PWR1, DOM2_PWR2)
This jumper allows SATA5 and SATA6 to support SATADOM which do not need external
power connections. Set to pins 2-3 to activate the SATA5 and SATA6 support feature.
• DOM1_PWR1 activates SATA5 support feature.
• DOM2_PWR2 activates SATA6 support feature.