Asus P10S-M - SATA Configuration

ASUS P10S-M
4-29
4.4.5 SATA Configuration
SATA Controller(s) [Enabled]
Allows you to enable or disable the SATA Device.
Congurationoptions:[Enabled][Disabled]
The following items appear only when you set
SATA Controller(s)
to
[Enabled]
.
SATA Mode Selection [AHCI]
ThisitemallowsyoutosettheSATAconguration.
[AHCI] Setto[AHCI]whenyouwanttheSATAharddiskdrivestousetheAHCI
(AdvancedHostControllerInterface).TheAHCIallowstheonboardstorage
driver to enable advanced Serial ATA features that increases storage
performanceonrandomworkloadsbyallowingthedrivetointernally
optimize the order of commands.
[RAID] Setto[RAID]whenyouwanttocreateaRAIDcongurationfromtheSATA
harddiskdrives.
The following item appears only when you set
SATA Mode Selection
to
[RAID]
.