Asus P10S WS - Page 100

3-34
Chapter 3: BIOS Setup
Chapter 3
HD Audio Controller [Enabled]
This item allows you to use the Azalia High Denition Audio Controller
Conguration options: [Disabled] [Enabled]
The following items appear only when you set the HD Audio Controller to [Enabled].
Front Panel Type [HD Audio]
This item allows you to set the front panel audio connector (AAFP) mode to legacy
AC’97 or high-denition audio depending on the audio standard that the front panel
audio module supports.
[HD Audio] Sets the front panel audio connector (AAFP) mode to high denition
audio.
[AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97
SPDIF Out Type [SPDIF]
[SPDIF] Sets to an SPDIF audio output.
[HDMI] Sets to an HDMI audio output.
M.2X1_1/ M.2X1_2 and SATA6G_56 Configuration [Auto]
This item allows you to set the SATA6G_56 Conguration.
[Auto] M.2 have higher priority than SATA6G_56. SATA6G_56 are no function
when any M.2 device is present.
[SATA6G_56] SATA6G_56 is always available. M.2 are no function.
ASMedia USB 3.1 Controller(USB3.1_EC1/USB3.1EA2) [Enabled]
This item allows you to disable or enable the ASMedia
®
USB 3.1 controller of your system.
Conguration options: [Disabled] [Enabled]
ASMedia USB 3.1 Battery Charging Support [Disabled]
This item allows you to disable or enable the ASMedia USB 3.1 battery charging support of
your system.
Conguration options: [Disabled] [Enabled]
USB Type C Power Switch [Auto]
[Auto] The system will automatically detect your USB Type C devices and provide
suitable power if needed.
[Enabled] The USB Type C port will always provide power to your devices.