Asus P4SD - 865GV Socket 478 mATX Motherboard - ASUS P4 SD-LA DIMM Installation Steps

4 ASUS P4SD-LA motherboard
Make sure to unplug the power supply before adding or removing DIMMs or
other system components. Failure to do so may cause severe damage to both
the motherboard and the components.
Follow these steps to install a DIMM.
1. Unlock a DIMM socket by pressing
the retaining clips outward.
2. Align a DIMM on the socket such that
the notch on the DIMM matches the
break on the socket.
3. Firmly insert the DIMM into the socket
until the retaining clips snap back in
place and the DIMM is properly
seated.
Unlocked Retaining Clip
DDR DIMM notch
Table 1 Recommended memory configurations
Table 2 Memory frequency/CPU FSB synchronization
Sockets
Mode DIMM1 DIMM2
Single-channel (1) Installed —
(2) — Installed
(3)
Installed Inst alled
CPU FSB DDR DIMM Type Memory Frequency
800 MHz PC3200/PC2700/PC2100 400/333/266 MHz
533 MHz PC2700/PC2100 333/266 MHz
400 MHz PC2100 266 MHz
Installing a DIMM