Asus P5E-V HDMI - Page 89

ASUS P5E-V HDMI 4-17
Some of the following items appear when you set Ai Overclocking to [Manual]
or [N.O.S.]. The items vary depending on which option you select.
N.O.S. Mode [Auto]
Allows you to set the Non-delay Overclocking System mode.
Conguration options: [Auto] [Standard] [Sensitive] [Heavy Load]
The following item appears when the N.O.S. Mode item is set to [Standard],
[Sensitive], or [Heavy Load].
Turbo N.O.S. [Overclock 3%]
Conguration options: [Overclock 3%] [Overclock 5%] [Overclock 10%]Overclock 5%] [Overclock 10%]] [Overclock 10%]Overclock 10%]]
[Overclock 15%] [Overclock 20%] [Overclock 30%]Overclock 15%] [Overclock 20%] [Overclock 30%]] [Overclock 20%] [Overclock 30%]Overclock 20%] [Overclock 30%]] [Overclock 30%]Overclock 30%]]
CPU Ratio Control [Auto]
Conguration options: [Auto] [Manual]
The following item appears when the CPU Ratio Control item is set to
[Manual].
Ratio CMOS Setting [14]
Whether this item is congurable depends on your CPU model. If it is
congurable, use the <+> and <-> keys to adjust the value. The value ranges
differently according to your CPU model.
FSB Frequency [XXX]
Displays the frequency sent by the clock generator to the system bus and PCI
bus. Use the <+> and <-> keys to adjust the FSB frequency. You can also type
the desired FSB frequency using the numeric keypad. The values range from 200
to 800. Refer to the table below for the correct Front Side Bus and CPU External
Frequency settings.
Ai Overclocking [Auto]
Allows selection of CPU overclocking options to achieve desired CPU internal
frequency. Select any one of the preset overclocking conguration options:
Manual Allows you to individually set overclocking parameters.
Auto Loads the optimal settings for the system.
Standard Loads the standard settings for the system.
N.O.S. The ASUS Non-delay Overclocking System feature
intelligently determines the system load and automatically
boosts the performance for the most demanding tasks.