Asus P5E-VM SE - Page 50

1-38 Chapter 1: Product Introduction
Q-Connector (system panel)
You can use ASUS Q-Connector to connect / disconnect chassis front panel
cables by only a few steps. Directions below shows how to install ASUS
Q-Connector.
Step2.
Properly install the ASUS Q-Connector
to the System panel connctor.
Step1.
Connect correct front panel to ASUS
Q-Connector rst. You can refer to the
marking on Q-Connector itself to know
the detail pin denition.
Step3.
Front panel functions are enabled.