Asus P5GD1 - Page 124

5-245-24
5-245-24
5-24
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
[ Define RAID Menu ]
Array No Array Mode Drive No Size(MB) Status
Array 0 ---- ---- ----- -----
Array 1 ---- ---- ----- -----
Array 2 ---- ---- ----- -----
Array 3 ---- ---- ----- -----
∗ : Capacity (GB) ♦ : Bootable Array
[↑] Up [↓] Down [Space] Boot Array [Enter] Select [ESC] Exit
Defining a RAID arrayDefining a RAID array
Defining a RAID arrayDefining a RAID array
Defining a RAID array
This option allows you to define supported RAID arrays.
To define a RAID array:
1. From the IT8212 Setup Utility screen, press <2>. The following screen
appears.
2. Use the up or down arrow keys or the space bar to select a RAID
array, then press <Enter>. The following sub-menu appears.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
[ Define RAID Sub-Menu ]
∗ : Capacity (GB)
[↑] Up [↓] Down [Space] Change Option [Ctrl-Y] Save [ESC] Exit
Channel
ID Drive Name Size(MB) Assignment
Pri/D0 XXXXXXXXXXXXXX XXXXXX Y
Pri/D1 XXXXXXXXXXXXXX XXXXXX Y
Sec/D0 XXXXXXXXXXXXXX XXXXXX Y
Sec/D1 XXXXXXXXXXXXXX XXXXXX Y
[ Drive Assignments]
Array No Array Mode Drive No Status
Array 0 Stripe 4 Functional
Block Size: 64KB