Asus P5KPL-AM IN GB - ASUS EZ Flash 2 Utility

2-2 ASUS P5KPL-AM IN/GB
2.1.2 ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based
utility.
Download the latest BIOS le from the ASUS website at www.asus.com.
To update the BIOS using EZ Flash 2:
1. Insert the USB ash disk that contains the latest BIOS le to a USB port, then launch
EZ Flash 2 in either of these two ways:
• Press <Alt> + <F2> during POST to display the following:
• Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and
press <Enter> to enable it.
2. Press <Tab> to locate the correct BIOS le. Press <Enter>. EZ Flash 2 performs the
BIOS updating process and automatically reboots the system when done.
• Only a USB ash disk with FAT 32/16 format and single partition supports ASUS EZ
Flash 2.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.34
Current ROM
Update ROM
A:
Note
FLASH TYPE: MXIC 25L8005
PATH: A:\
BOARD: P5KPL-AM IN/GB
VER: 0303 (H:00 B:03)
DATE: 02/09/2009
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
Updating from a BIOS file
a. Select Update BIOS from a le, then click Next.
b. Locate the BIOS le from the Open window, then click Open.
3. Follow the onscreen instructions to complete the updating process.