Asus P5KPL SE - IDE Configuration

ASUS P5KPL SE 2-17
PIO Mode [Auto]
Selects the PIO mode. Conguration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Conguration options: [Auto]
SMART Monitoring [Auto]
Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology)
capability of your hard drive. This features allows your system to report read/write
errors of the hard drive and to issue warnings when a third party hardware monitor
utility is installed. Conguration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer. Conguration options: [Disabled]
[Enabled]
2.3.5 Storage Conguration
The items in this menu allow you to set or change the congurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
congure the item.
Storage Conguration
ATA/IDE Conguration [Enhanced]
Enhanced Mode Support On [S-ATA]
IDE Detect Time Out (Sec) [35]
ATA/IDE Conguration [Enhanced]
Allows you to set the ATA/IDE conguration. Conguration options: [Disabled]
[Compatible] [Enhanced]
[Disabled] - Disables the integrated SATA and PATA controller.
[Compatible] - Sets all SATA devices to operate in PATA mode. This allows a
maximum of four (4) ATA devices to be used simultaneously:
two PATA devices and two SATA devices.
[Enhanced] - Sets all SATA devices to operate in SATA mode.
Enhanced Mode Support On [S-ATA]
Allows you to set Serial ATA, Parallet ATA or both as native mode.
Conguration options: [S-ATA+P-ATA] [S-ATA] [P-ATA]
Disabled
Compatible
Enhanced
Options